The Updated OStim Standalone Troubleshooting Guide (2024)

Discord Server
Having an active community isessential for the longevity of a mod. It attractsnew content creatorsandsupporters.


Wabbajack modlist

Wabbajackmodlist "OStim Community Modlist" information:link(this is a message in theOStim Community Discord server).


∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙

OStim SA New Issues

Crash on scene end
Try turning off face (and similar) lights if you have them activated.
Some users have also reportedUnequip Quiver SE could be causing CTD on scene end.

Scene integrity not verified screen
OStim Standalone was updated to display this screen on every game load if the scene files that come with it have been modified.
It does not mean something is broken, and you may ignore it.
If you want to remove it, make sure you don't have a mod that is overwriting files from the folder\SKSE\Plugins\OStim\scenesthat come with OStim.


OStim Standalone: Your OStim.dll or OSexIntegraionMain.pex is being overwritten with an old version.

Uninstall "OStim Standalone - Extended Futanari Animation Support".
It is not compatible and superseded by new features in OStim Standalone.

Crash on character orgasm/climax
You have installed OSL Aroused but did not install OSL Aroused - Arousal Reborn - OStim Standalone.

Character facing sideways upon scene start
This issue is caused by the dialogue head tracking setting in True Directional Movement.
The default value for this setting is 3 seconds and you can reduce the occurrence of the issue by setting it to 1 second.
If you disable the feature entirely, the issue will not happen.

OStim SA Troubleshooting Guide - Frequent Issues

When I start a scene, the characters are just standing idle and doing nothing.
Verify if you have made one of the following mistakes:

1)You have the wrong versions of the dependencies for yourSkyrim: Special Editionversion.
Solution:Skyrim: Special Editionversion 1.5.97 is known as SE andSkyrim: Special Editionversion 1.6.x is known as AE.
Even if you only bought "Skyrim: Special Edition", the latest version of it (1.6.x) is known as AE.
Download and install the compatible versions of the dependencies according to theinstallation guide.

2)You have installedOStim SAon a current save in which you previously installed the incompatible modsOSAorOSex.
Solution:Check if it works properly on a new game. If it does, clean your current save (instructions at the bottom of this article).

The MCM menu is empty.
There is no MCM menu for OStim.

First of all, make sure you have the correct versions of all the dependencies for yourSkyrim: Special Editionversionaccording to theinstallation guide.
Only after you have confirmed this, if it still doesn't work, try these solutions:

1)MoveOStim.espto the bottom of your plugin load order;
2)Wait 3 minutes in game. InstallMCM Kickerfor possibly speeding this process up. Also getPapyrus Tweaks NGfor faster script performance;
https://www.nexusmods.com/skyrimspecialedition/mods/36801
https://www.nexusmods.com/skyrimspecialedition/mods/777793) Wait 30 seconds. Check the MCM menu. Go into a new cell. Repeat until the OStim Standalone menu appears.

"OStim not ready or installation failed".
This error happens when...
1)You have the wrong version of a dependency or it is being overwritten. Make sure your requirements are correct according to theinstallation guide.
2)Check if the folderC:\Users\(username)\Documents\My Games\Skyrim Special Editionis set to read-only. Disable read-only if it is.
3)You have a lot of script lag andOStim SAis taking forever to initialize. See if it works on a new game and, if it does, clean your existing save.Also getPapyrus Tweaks NGfor faster script performance.
4)On the title menu, open the console and type "coc qasmoke". This will load you into an area with less script load and may helpOStim SAinitialize properly.
5)See if you have a file\Documents\My Games\Skyrim Special Edition\JCUser\ODatabse.json. If you do, delete it, so thatOStim SAwill generate a new one when you restart the game.
6)You may get this issue whenSexLabis installed; try disabling it.

Characters are redressing in the middle of the scene.
You have installed3BAorBHUNPbody.
By default, these mods bind the same keys asOSA. The solution is torebind the hotkeysin the3BA/BHUNPMCM; you may bind them to Esc in order to unassign them.

"No valid animation found"
This error happens whenOStim SAcannot find a suitable animation to call.
This happens when you don't have an animation that fits the mod that is calling it (for example, if it tried to call a group scene, but you don't have group animations.)

Facial expressions are static or not working.
Conditional Expressions - Subtle Face Animations conflicts with OStim expressions (this version is presumed to work).
If it's exclusive to the player character, try opening and closing RaceMenu.

OStim seems to work, the scenes start, but there are no navigation options.
Do you haveImmersive HUD,SkyHUD, orSurvival Control Panel? Mods that hide HUD elements will also hide the OSA UI. Press the "Show HUD" hotkey of your mod in question, or make sure it otherwise does not disable "HUD Indicators".

The game crashes (CTD) when starting a scene.
Make surePrecisionandRaceMenuare updated for yourSkyrim: Special Editionversion.

Characters are misaligned.
How to fix misalignment?
1)RaceMenuscaling: OStim SA can account for changes in height scale through RaceMenu, but not the scaling of individual nodes. If you have changed the scale of individual nodes, undo those changes.
2)FK Diverse Racial Skeletons: This mod has been reported to cause misalignments. If you have it installed, try disabling it.
3)Mu Joint Fix: If you have Mu Joint Fix, make sure you have version 2.0.0 or greater. Versions earlier than 2.0.0 causes misalignment in OStim.

Reminder: Incompatible ModsThe following mods areincompatiblewith OStim SA:
  • OSex,OSexanimation packs,Unofficial OSex Bug Patch;
  • Journeyman is currently causing CTD with OStim Standalone, hopefully there will be a fix soon.
  • OSA(you may still use OSA for OStim, as OStim SA does not interact with it, and it is a dependency, albeit needless, of some mods);
  • OAlign, OSearch, OSound;
  • AnyConsoleUtilSSEversion that is notConsoleUtilSSE NG.
  • Conditional Expressions - Subtle Face Animations(this versionis presumed to work).
  • FK's Diverse Racial Skeletons(causes misalignment);
  • Racial Body Morphs Redux SSE AE - FKDRS - Diverse body types and height by Race and Gender(causes misalignment);
  • True Player Idling:this mod will interfere during OStim scenes and cause UI and Camera issues;
  • NPC Names Distributor: this mod may cause crashes on scene start. Certain versions may also have issues with OBodyNG and preset detection. Try disabling this mod or removing to see if it resolves these issues;
  • Immersive Interactions Teleportation Bug Fix(some users reported that it caused CTD, but see for yourself if you'd like to use it);
  • Certain version combinations ofCompass Navigation OverhaulandCoMAPbreakRacemenuand are therefore not compatible. Read the mod pages of both.
Reminder:Clean save procedure

If OStim works on a new save, but not on your existing save, you can get it working on your existing save by performing a "clean save procedure".
If during the game you notice that OStim stops working as it did previously, see if that is the case.
You should not attempt do this is your OStim does not work on a new game. That would be pointless.
1. Disable OStim and all OStim addons in your mod manager (including iWant Widgets if you have ORomance). Disabling Open Animations RE is not necessary.
2. Launch the game and it will complain about missing mods. If it says your game is corrupt, the culprit may have been OPrivacy; enable the mod but disable its .esp and try again.
3. Play the game for a minute or two. Run around, change cells, etc.
4. Save the game.
5. Open the new save inFallrim Tools ReSaver and clean it (see "Instructions" in the middle of ReSaver's mod page description to understand how to do this).
6. Re-enable OStim and any other related plugins that were disabled in step 1.
8. Launch game.
9. Load the clean save you made.
10. Give the game a few minutes to get the OStim MCM working. The game now believes you have never had OStim installed because you cleaned your save.
The Updated OStim Standalone Troubleshooting Guide (2024)

FAQs

How to fix OStim not working? ›

Try right-clicking on the OStim NG mod in Mod Organizer 2 and selecting "reinstall." There shouldn't be any options to choose, so just click through. Launch the game and attempt your adult interaction again. If this STILL doesn't work, Refer to the readme and keep reinstalling the list until the error messages go away.

Do you need OSex for OStim? ›

The following mods break OStim Standalone functionality and should not be used in combination with OStim Standalone: OStim (non Standalone) OSA by CEO. OSex, or anything starting with “OSex”

How to activate OStim in Skyrim? ›

If you're starting the scene in a quest stage you'll need to change akSpeaker to a property that points to the specific actor (or a quest alias) you want to be the partner in your scene. That's it! A basic OStim scene should start.

Is OSA compatible with OStim? ›

You may still have OSA for OStim 1.3 enabled for the mods that require it, as OStim SA does not interact with it.

Why is my SKSE64 not running? ›

Fix: If SKSE64 fails to launch, it might be due to conflicts with other software, such as anti-virus or firewall programs. Temporarily disable these programs, launch SKSE64, and then re-enable them. Make sure to add SKSE64 as an exception if necessary.

What is the best body for OStim? ›

FEMALE BODY: BASICS

Both work, but BHUNP is the best body for collisions during OStim NG scenes. Up-close inspection will reveal that BHUNP simply bends much more naturally than 3BA. This is particularly relevant if you use first-person perspective.

Can you run OSex and SexLab at the same time? ›

They shouldn't conflict with each other. The issue will arise if you use two mods that alter the same content, one that uses SexLab, and the other that uses OSex.

Does OStim work with AE? ›

For OStim: For both SE and AE, download version 5.5 from Nexus: https://www.nexusmods.com/skyrimspecialedition/mods/40725 Now you have the dependencies and the frameworks, but you need animations. Here is where you have a choice to make.

Do you need sigil stone for Atronach forge? ›

The Sigil Stone is a necessary ingredient for the forging of Daedric armor and Daedra hearts at the Atronach Forge in The Midden beneath the College of Winterhold.

Is Project Skyrim NSFW? ›

It focuses on gameplay, world space add-ons, quests, etc. PROJECT SKYRIM also comes with an adult content addon, that is completely unintrusive.

What is the Q button in Skyrim? ›

Used to mark the items/spells/shouts in the quick [favorites] menu (hotkey Q) you may later equip ingame by pressing the respective hotkey.

How do I start skse64 in Skyrim? ›

The options for starting the game via skse64_loader.exe: Double-click the skse64_loader.exe icon in the Skyrim game folder. Create a shortcut on the desktop to skse64_loader.exe. Add skse64_loader.exe as a non-Steam game (to launch from the Steam app)

Is OSA a good attacker? ›

Osa is a Rainbow Six Siege attacker who was introduced to the game with the launch of Operation Crystal Guard. Osa is known for having two shields. She can use them to cover herself while standing behind them. She is very powerful as a support, flank-watcher, and in post-plant situations.

Is Arcanum compatible with Odin? ›

Arcanum: Compatible. Clean Up Your Corpses: Mostly compatible. Clean Up Your Corpses greatly increases the Magicka cost of certain spells, due to what appears to be a bug with Clean Up Your Corpses. Load Odin below it to prevent this.

What is osa skyrim? ›

OSA - Skyrim Ascendancy Engine is a user interface mod for The Elder Scrolls V: Skyrim and The Elder Scrolls V: Skyrim Special Edition. The mod is an engine that greatly expands Skyrim's potential.

Why wont my Skyrim work? ›

Disable Background Applications

Programs running in the background can, in some cases, cause issues when launching new games. Disable any unnecessary programs and try to launch the game again.

How to activate FNIS? ›

Add FNIS to the list of executables by doing the following:
  1. In the right pane, go to the Data tab.
  2. Locate the tools folder and expand it. ...
  3. Right-click the GenerateFNISforUsers.exe file and select [Add as Executable].
  4. In the window that opens, type FNIS SE for the Title.
  5. Click [OK]
Jan 3, 2023

How do I fix my Skyrim launcher? ›

Fix 1: Run Skyrim As Administrator

Launching the game as administrator might be helpful to fix the issue. Just right-click the executable or shortcut icon of Skyrim and choose Properties. Then, check Run this program as an administrator option under the Compatibility tab, and click Apply and OK to save changes.

How to run Nemesis in Skyrim? ›

Nemesis must be run whenever animation/skeleton mods are added/updated. To do so: Ensure all plugins are ticked, and sorted with LOOT. Choose Nemesis from the executables dropdown and click Run to run it through Mod Organizer.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Ms. Lucile Johns

Last Updated:

Views: 5267

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Ms. Lucile Johns

Birthday: 1999-11-16

Address: Suite 237 56046 Walsh Coves, West Enid, VT 46557

Phone: +59115435987187

Job: Education Supervisor

Hobby: Genealogy, Stone skipping, Skydiving, Nordic skating, Couponing, Coloring, Gardening

Introduction: My name is Ms. Lucile Johns, I am a successful, friendly, friendly, homely, adventurous, handsome, delightful person who loves writing and wants to share my knowledge and understanding with you.